Á¦¸ñ:ÀͽºÆ®·Ð (Extron) MVX 48 VGA A (4*8 ºñµð¿À.¿Àµð¿À) RGB(¸ð´ÏÅÍ) ¼¿·ºÅÍ,ºÐ¹è±â>¸ÞÆ®¸¯½º RGB½ºÀ§ÃÄ [ÀͽºÆ®·Ð »çÀÇ 4*8 ¸ÅÆ®¸¯½º ½ºÀ§Ã³,À½¼º ½ºÅ×·¹¿À Áö¿ø]ÀͽºÆ®·Ð (Extron) MVX 48 VGA A (4*8 ºñµð¿À.¿Àµð¿À)|¼¿·ºÅÍ,ºÐ¹è±â,KVM>RGB(¸ð´ÏÅÍ) ¼¿·ºÅÍ,ºÐ¹è±â>¸ÞÆ®¸¯½º RGB½ºÀ§ÃÄ>
°ü·Ã¾î:ÀͽºÆ®·Ð,(Extron),MVX,48,VGA,A,(4*8,ºñµð¿À.¿Àµð¿À),RGB(¸ð´ÏÅÍ),¼¿·ºÅÍ,ºÐ¹è±â>¸ÞÆ®¸¯½º,RGB½ºÀ§ÃÄ,[ÀͽºÆ®·Ð,»çÀÇ,4*8,¸ÅÆ®¸¯½º,½ºÀ§Ã³,À½¼º,½ºÅ×·¹¿À,Áö¿ø]ÀͽºÆ®·Ð,(Extron),MVX,48,VGA,A,(4*8,ºñµð¿À.¿Àµð¿À)
¼³¸í:The MVX 48 VGA A is a 4x8 VGA is designed to route high resolution computer-video and stereo audio signals. Convenient 15-pin HD connectors are used for all computer-video input and output connections. Unbalanced stereo audio is input on 3.5 mm stereo mini jacks, while balanced or unbalanced stereo audio is output on captive screw connectors. Using pre-terminated cable assemblies, such as Extron\'s VGA with Audio Cables, eliminates crimping and makes installations faster and easier. In addition, the MVX 48 VGA A comes standard with the QS-FPC¢â - QuickSwitch Front Panel Controller, which allows for touch-of-a-button input and output selection directly from the front panel. It can also be controlled through RS-232 serial control utilizing Extron\'s SIS¢â - Simple Instruction Set commands, the optional Extron IR 501 remote control, the optional Extron MKP 2000 or MKP 3000 X-Y remote control panels, or via a third party control system. Features Inputs: VGA on female 15-pin HD connectors; audio on 3.5 mm stereo mini jacks Outputs: Video on female 15-pin HD connectors; audio on captive screw connectors 300 MHz (-3 dB) RGB video bandwidth, fully loaded — Designed for routing most common high resolution computer-video rates without signal degradation. The MVX Series provides a minimum 300 MHz (-3 dB) of RGB video bandwidth at full performance capability when one input drives all outputs. Triple Action Switching¢â for RGB delay — RGB delay blanks the screen when the matrix switcher switches to a new source. The new sync signals precede the RGB signals, so there is no glitch during the transition. Switches both balanced and unbalanced stereo audio — Output on captive screw connectors. Audio input gain and attenuation — Allows users to set the level of gain or attenuation for each audio input channel, eliminating noticeable volume differences when switching between sources. Audio breakaway — Provides the capability to break an audio signal away from its corresponding video signal, allowing the audio and video signals from one source to be switched to different destinations. Switchable audio output levels — Output levels can be switched between +4 dBu professional and -10 dBv consumer levels, allowing a mix of professional and consumer-level audio equipment. View I/O mode — Easily view which inputs and outputs are actively connected. QS-FPC¢â - QuickSwitch Front Panel Controller — Provides a discrete button for each input and output, allowing for simple, intuitive operation. Global presets — Frequently-used I/O configurations may be saved and recalled from the front panel or via serial control. This time-saving feature allows you to set up I/O configurations and store them in memory for future use. Front panel security lockout — Prevents unauthorized use when the matrix switcher is installed in an unsecured environment where easy access is not desirable. In lock-out mode, a special button combination is required to operate the front panel. RS-232 control port — Using RS-232 serial commands, the MVX Series can be controlled and configured via the Extron Windows¢ç-based control program, or integrated into third-party control systems. Extron products use the SIS - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The serial port also makes it easy to install firmware updates. Optional control panels and keypads — Optional X/Y control panels, bus control panels, and keypads provide the flexibility to control an MVX Series matrix switcher from a remote location. Optional IR 501 handheld remote control 1U, rack-mountable Internal international power supply — For worldwide compatibility, all models are equipped with an internal, autoswitching power supply that meets or exceeds all appropriate safety certifications. MVX VGA A Series Matrix Switchers Video   Routing           MVX 44 VGA A   4 x 4 matrix         MVX 48 VGA A   4 x 8 matrix         MVX 84 VGA A   8 x 4 matrix         MVX 88 VGA A   8 x 8 matrix         MVX 128 VGA A   12 x 8 matrix   Gain   Unity   Bandwidth   300 MHz (-3 dB), fully loaded   Crosstalk           MVX 128 VGA A   -80 dB @ 1 MHz, -55 dB @ 10 MHz, -37 dB @ 100 MHz         All other models   <-60 dB nominal @ 10 MHz, <-39 dB @ 100 MHz   Switching speed           MVX 128 VGA A   200 ms (max.)         All other models   20 ms (max.) Video input   Number/signal type           MVX 44/48 VGA A   4 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video         MVX 84/88 VGA A   8 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video         MVX 128 VGA A   12 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video   Connectors           MVX 44/48 VGA A   4 female 15-pin HD         MVX 84/88 VGA A   8 female 15-pin HD         MVX 128 VGA A   12 female 15-pin HD   Nominal level   1 Vp-p for Y of component video and S-video, and for composite video0.7 Vp-p for RGB0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video   Minimum/maximum levels   Analog: 0.3 V to 2.0 Vp-p with no offset at unity gain   Impedance   75 ohms   Horizontal frequency   15 kHz to 145 kHz   Vertical frequency   30 Hz to 170 Hz   Return loss   <-40 dB @ 5 MHz   DC offset (max. allowable)   1.5 V Video output   Number/signal type           MVX 44/84 VGA A   4 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video         MVX 48/88/128 VGA A   8 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video   Connectors            MVX 44/84 VGA A   4 female 15-pin HD         MVX 48/88/128 VGA A   8 female 15-pin HD   Nominal level   1 Vp-p for Y of component video and S-video, and for composite video0.7 Vp-p for RGB0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video   Minimum/maximum levels   0.3 V to 2.0 Vp-p (follows input)   Impedance   75 ohms   Return loss   <-40 dB @ 5 MHz   DC offset (max. allowable)           MVX 128 VGA A   ¡¾5 mV with input at 0 offset         All other models   <20 mV with input at 0 offset   Switching type   Triple-Action¢â Sync   Input type   RGBHV, RGBS, RGsB, RsGsBs   Output type   RGBHV, RGBS, RGsB, RsGsBs (follows input)   Standards   Computer scan rates and also NTSC 3.58, NTSC 4.43, PAL, SECAM   Input level   0.5 V to 5.0 Vp-p   Output level   AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated   Input impedance   510 ohms   Output impedance   75 ohms   Max. propagation delay           MVX 128 VGA A   30 ns nominal         All other models   Horizontal: 90 ns nominalVertical: 160 ns nominal   Max. rise/fall time   4 ns   Polarity   Positive or negative (follows input) Audio   Routing           MVX 44 VGA A   4 x 4 stereo matrix         MVX 48 VGA A   4 x 8 stereo matrix         MVX 84 VGA A   8 x 4 stereo matrix         MVX 88 VGA A   8 x 8 stereo matrix         MVX 128 VGA A   12 x 8 stereo matrix   Throughput gain           MVX 128 VGA A   Unbalanced output: -6 dBBalanced output: 0 dB         All other models   Adjustable. At default (when input gain is set to 0 dB and output level is set to \'Pro\'), overall gain is 12 dB for balanced output. The gain range is -6 dB to +22 dB for balanced output when the output level is set to \'Pro\'.   Frequency response   20 Hz to 20 kHz, ¡¾0.2 dB   THD + Noise   0.05% @ 1 kHz, 0.3 % @ 20 kHz at nominal level   S/N   >90 dB, balanced, at maximum output (unweighted)   Crosstalk   <-65 dB @ 20 kHz, <-80 dB @ 1 kHz (fully loaded) or below 60 Hz   Stereo channel separation   >80 dB @ 1 kHz, >55 dB @ 20 Hz to 20 kHz   CMRR   >75 dB @ 20 Hz to 20 kHz Audio input   Number/signal type           MVX 44/48 VGA A   4 stereo, unbalanced         MVX 84/88 VGA A   8 stereo, unbalanced         MVX 128 VGA A   12 stereo, balanced or unbalanced   Connectors           MVX 44/48 VGA A   4 female 3.5 mm stereo mini jacks: tip (L), ring (R), sleeve (GND)         MVX 84/88 VGA A   8 female 3.5 mm stereo mini jacks: tip (L), ring (R), sleeve (GND)         MVX 128 VGA A   (12) 3.5 mm captive screw connector, 5 pole   Impedance           MVX 128 VGA A   >10k ohms unbalanced/balanced, DC coupled         All other models   >18k ohms unbalanced, DC coupled   Nominal level           MVX 128 VGA A   0 dBV, 0 dBu         All other models   -10 dBV (316 mV) (default), but also compatible with +4 dBu (1.23 V), 0 dBu (0.775 V), ‑20 dBV (100 mV)   Maximum level           MVX 128 VGA A   >+19.5 dBu (7.316 V), (balanced/unbalanced) at 0.01% THD+N         All other models   >+12 dBV (4 V), (unbalanced) at 1% THD+N   Input gain           MVX 128 VGA A   -18 dB to +24 dB, adjustable per input by RS-232/422, Ethernet, or front panel         All other models   -18 dB to +10 dB, adjustable per input; default = 0 dB. (This is referenced to the internal bus signal level. It can be verified by measuring the unbalanced output when the output level is set to \'Consumer\'.)    NOTE    0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu Audio output   Output gain   0 dB unbalanced (consumer) or +12 dB balanced (pro), selectable;default = +12 dB, balanced, when output level is set to \'Pro\'   Number/signal type           MVX 44/84 VGA A   4 stereo, balanced/unbalanced         MVX 48/88/128 VGA A   8 stereo, balanced/unbalanced   Connectors            MVX 44/84 VGA A   (4) 3.5 mm captive screw connectors, 5 pole         MVX 48/88/128 VGA A   (8) 3.5 mm captive screw connectors, 5 pole   Impedance   50 ohms unbalanced, 100 ohms balanced   Gain error   ¡¾0.1 dB channel to channel   Nominal level (output volume range)           MVX 128 VGA A   0 to 64 (-98 dB to 0 dB) in 1 dB increments from steps 1 to 64, 35 dB increment from step 0 to 1         All other models   +4 dBu (1.23 V) (default) balanced (pro), or-10 dBV (316 mV) unbalanced (consumer), selectable   Maximum level (Hi-Z)           MVX 128 VGA A   >+21 dBu, balanced or unbalanced, at 0.1% THD+N at default settings         All other models   >+22 dBu, balanced; >+14 dBV, unbalanced at 1% THD+N at default settings   Maximum level (600 ohm)           MVX 128 VGA A   >+15 dBm, balanced or unbalanced, at 0.1% THD+N at default settings         All other models   >+20 dBu, balanced; >+12 dBV unbalanced at 1% THD+N at default settings Control/remote — switcher   Serial control port           MVX 128 VGA A   1 RS-232 or RS-422, 9-pin female D connector         All other models   1 RS-232, 9-pin female D connector   Baud rate and protocol           MVX 128 VGA A   9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity         All other models   9600, 8-bit, 1 stop bit, no parity   Control pin configurations           MVX 128 VGA A   RS‑232: 2 = TX, 3 = RX, 5 = GNDRS‑422: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = Tx+         All other models   2 = TX, 3 = RX, 5 = GND, 9 = hardwired IR input   IR controller module   IR 501 (optional remote control for MVX 44/48/84/88 VGA A models)   Program control   Extron\'s control/configuration program for Windows¢çExtron\'s Simple Instruction Set (SIS¢â) General   Power   100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal, autoswitchable   Temperature/humidity   Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensingOperating: +32 to +122 ¡ÆF (0 to +50 ¡ÆC) / 10% to 90%, noncondensing   Rack mount   Yes, with included brackets, part #70-077-03, or furniture mountable with an optional under-desk mounting bracket, part #70-222-01   Enclosure type     Enclosure dimensions           MVX 128 VGA A   3.5\' H x 17.4\' W x 9.4 D (2U high, full rack wide)8.9 cm H x 44.2 cm W x 23.9 cm D(Depth excludes connectors and knobs. Width excludes rack ears.)         All other models   1.75\' H x 17.4\' W x 8.5\' D (1U high, full rack wide)4.4 cm H x 44.2 cm W x 21.6 cm D(Depth excludes connectors and knobs. Width excludes rack ears.)   Product weight           MVX 128 VGA A   21 lbs (9.5 kg)         All other models   7.0 lbs (3.2 kg)   Shipping weight           MVX 128 VGA A   25 lbs (12 kg)         All other models   10 lbs (5 kg)   Vibration   ISTA 1A in carton (International Safe Transit Association)   Listings   UL, CUL   Compliances   CE, FCC Class A, VCCI, AS/NZS, ICES   MTBF   30,000 hours   Warranty   3 years parts and labor    NOTE    All nominal levels are at ¡¾10%    NOTE    Specifications are subject to change without notice. ¡¡ < <